We have all models in stock! Shipments made weekly!
Note: This page is a blog. Scroll to the bottom and click to see earlier posts.

Monday, May 7, 2018

1,000 uses around the house.

There's always a way to use the AmeriDeck SuperDeck III when you have hobbies or a business.  The deck lifts up to #2,500 at the touch of a button... Just be certain that the load is sucure and that your vehicle is rated for heavy loads.   It's one tink to lift a ton of bricks into your truck... It's another thing to stop that load from 60 MPH...

Primarily used for Hauling motorcycles, (two full dress harleys will fit on the deck, these decks are very versatile.  Sitting about the wheelwells, you still have storage below deck for tools and equipment.

Short or long-bed versions are priced at $4,380, FOB the factory in Hadley, PA.  The Can-Am specific extension is $650. We usually have several of each size in stock, but if not, they come off the production line once each month.

Most motorcycles will load directly onto the deck, either anchored with tie-downs or add wheel chocks for security.  We recommend the Condor brand chocks.

The Can-Am Spyder will fit on the standard full-size (8') deck by loading it rear first.  Strap the rear wheel to the bulkhead and the nose of the Spyder will hang slightly over the end of the deck to the rear.

The Can-Am Spyder deck is 6" longer (102" flat deck length) and the landing-wheels are spaced wider to 62" clearance.


The Can-Am Spyder can be loaded on the regular SuperDeck III by backing it onto the deck until the rear tire touches the deck bulkhead.  The Can-Am Spyder deck provides more room to work.

The special Can-Am deck has the landing wheels spaced to allow a 62" wide clearance and has blocking posts to block the front wheels in place withought the front of the Spyder reaching the bulkhead. . The deck floor is 102" by 58", and the rear wheels are 62" wide to accommodate the Spyder's stance. The bulkhead height is the standard 29-5/8". These measurements allow a Spyder to be driven forward onto the deck rather than backed on.


The company manufactures several options, from stake sides to dump beds.   For that matter, a quality welding or machine shop can probably make most modifications you may want.
Exercise caution when transporting your equipment...   the roof at McD's drive-thru may not accomidate your load.
Just press the button and your load is headed onto your truck or into your space at your destination.  The control pendant cable unplugs to avoid operation without your permission.

Available in short or long bed versions for $4,380, FOB the factory in PA.  We have installers all across the country!  Any trailer dealer will be find with installing this.   DIY takes about two hours and a 1/2" drill.

Call for details!  

Jeff  -  717-620-9676
Jeff@kurtzinpa.com
Click HERE to download a brochure<<<


#amerideckmidwest #powerdecks #superdeck #motorcycletowing #rampage #amerideck #motorcycleramp #motorcycletrailer #wheelchocks #condor #tommygate #tomylift

#biketowing #cycletow #motorcycleroadside #motorcyclerecovery #towingmotorcycles #motorcycletransport

Tuesday, May 1, 2018

Specifications


As of October 18th, all decks and lifts are now being ZINK coated by power-coating prior to the black powder coat!

Here are a few photos with dimensions for the deck and where it sits on the truck.  The actual dimensions of the flat decks are:

Short-bed:   78" open area from the wall of the deck bulkhead to where the 6" ramp begins. 
Long-bed:    96" open area

Both decks are 58" wide.  The standard bulkhead is 29 5/8" tall.


 At its tallest position the lift arm reaches 63" above the bed of the truck.

Click HERE to download a brochure<<<




 





18" deck extension installed on 8' deck.
The photo below shows an 8' deck with the 18" extension added.  The extension mounts in the landing wheel receivers and the wheels are then moved back to the receivers in the extension.


Either size deck is $4,380 FOB factory in PA.